How to make beeswax candles with an easy DIY tutorial.
I’ve been making my own handmade candles for years now.
First, I started off making my own rolled beeswax candles. My kids and I have been making these together for over 10 years.
Next, it was homemade soy candles. I’ve been making my own soy candles for years, too.
But now I’m going to share with you my favorite natural candles of all. Beeswax candles are the healthiest candles I’ve come across yet. And they’re so easy to make!
In this tutorial, you’ll learn how to make your own homemade beeswax candles with just a few ingredients and simple supplies.
Watch the Video
Why Should You Learn How to Make Beeswax Candles?
Beeswax candles are beautiful and natural, and they make great gifts!
But more importantly, beeswax candles are non-toxic, and they can actually purify the air in your house!
Natural beeswax candles are cleaner burning than paraffin candles, so you can feel good about using them.
Learning how to make your own candles is a useful skill that’s also easy to learn.
This post contains affiliate links below. Read my full disclosure here.
What Do You Need to Make Beeswax Candles?
As I mentioned above, you only need a few basic supplies to make these easy beeswax candles.
- 1 pound beeswax
- 1/2 cup coconut oil
- wax melting pitcher and saucepan for double boiler
- candle wicks*
- 8 ounce jelly jars or 4 ounce canning jars (or any size you have available)
- glue gun and glue sticks
- clothespins
- essential oils, optional
A note about scenting beeswax candles with essential oils: it takes a lot of essential oils to scent candles. For this reason, I usually don’t add them to my homemade beeswax candles.
Usually, I just leave the candles as they are, with their delicate, natural honey scent.
But if you want to add essential oils, you could try about 40-55 drops of essential oils (or even up to as much as a tablespoon or two). You may need to experiment to see how many drops you’ll need.
Because it takes so many drops of the essential oils to scent the candles, you could use cheaper essential oils for this.
*A note about choosing the correct candle wicks: finding the correct wick for your candles can be complicated! And beeswax candles are especially difficult.
There are many different factors to take into consideration, including the purity of each particular brand of beeswax and the size of container you’re using.
Choosing the right size candle wick for the diameter of the container is an important consideration.
I’ve linked above to candle wicks similar to the ones I used for this project. However, you may need to do some experimentation to find just the right wick for your particular combination of wax and container.
How to Make Beeswax Candles
Learning how to make beeswax candles is easy and fun. Here are the simple steps for making your own.
1. Heat up your glue gun and stick the wicks (these are the wicks I recommend trying) to the bottom of the jars. Try to keep the wicks in the center of the jar.
2. Fill your saucepan or pot about half full of water, put it on the stove, and bring water to a boil.
3. Pour 1 pound of beeswax pellets into your wax melting pitcher or other container (I bought this candle making pitcher almost 7 years ago, and it’s still working well for me).
4. Set the container with the beeswax into the boiling water in the saucepan to create a double boiler effect. Turn the heat down so the water is just gently boiling or simmering.
5. Allow the beeswax to melt. Stir occasionally. I use a wooden skewer or a wooden spoon from the thrift store for this.
6. After the beeswax has melted, add the 1/2 cup of coconut oil. Stir to combine, and wait for it to melt. Then add any essential oils, if using.
7. Quickly pour the melted beeswax and coconut oil into your jars. Work quickly because beeswax starts to set up very fast.
8. After pouring the wax into your containers, center the wick with a clothespin (see the video if this is unclear), or use a pencil or bamboo skewer to center the wick.
9. Allow the candles to sit undisturbed while the wax sets up and hardens. Then trim the wicks to about 1/4″ to 1/2″ long.
10. I usually wait a day or two before lighting the candles for the first time. This allows them to cure. When lighting for the first time, it’s a good idea to let the candle burn for a few hours (about 3-4 hours).
This will help your candle burn better, and it also can prevent tunneling (assuming the correct size wick was used).
Plan for about 3-4 hours burn time each time you light your candle, and it should burn better.
That’s all there is to it!
More Candle Tutorials
- How to Make Your Own Soy Candles
- How to Make Rolled Beeswax Candles
Troubleshooting Beeswax Candles
Beeswax is a bit trickier to work with than other types of wax. The type of wax and the source can even make a difference.
The wicks I’ve used in this tutorial have worked well for me, but they may not work well with your wax or your containers.
With beeswax, it’s recommended that you test different sizes of wicks to see how each one will perform with your particular container and wax.
How to Avoid Cracks
I haven’t experienced cracks with my candles, but I’ve received a couple of questions about how to avoid this.
I’ve read that in order to avoid cracks, try to let the candle cool more slowly in a warm location. Also, you might try pouring the wax at a slightly cooler temperature (155-160 degrees has been the suggestion I’ve seen). You can also try heating the containers before pouring the beeswax into them (heat in a warm oven).
If you want to fill in cracks after they occur, you can melt some beeswax and pour it in the cracks to fill them in (I haven’t tried this myself, I just saw the suggestion on a candle website).
Avoiding Tunneling
Sometimes tunneling occurs because the wrong wick (for the size of the jar) was used. And it can take a bit of trial and error to find the best wick for the container used.
My beeswax candles made in jelly jars have a nice burn pool, spreading all the way to the edges. But the ones made in the wide mouth jars don’t burn as fully to the edges because I think they could really use a different/bigger wick.
The other (very common) reason for tunneling is that the candle wasn’t allowed to burn long enough. I usually plan to burn my candles for about 3 hours each time they are lit.
This is especially important for the first time the candle is lit, as it helps it to burn more successfully after that.
Beeswax candles can take a bit of experimentation to get them right!
Print Recipe
How to Make Beeswax Candles
Learn how to make beeswax candles with this easy DIY tutorial!
Keyword: beeswax candles, homemade candles, how to make beeswax candles
Servings: 3 candles
Author: Joy | Artful Homemaking
Ingredients
- 1 pound beeswax
- 1/2 cup coconut oil
- wax melting pitcher and saucepan for double boiler
- candle wicks
- 8 ounce jelly jars or 4 ounce canning jars or any size you have available
- glue gun and glue sticks
- clothespins
Instructions
Heat up your glue gun and stick the wicks to the bottom of the jars. Try to keep the wicks in the center of the jar.
Fill your saucepan or pot about half full of water, put it on the stove, and bring water to a boil.
Pour 1 pound of beeswax pellets into your wax melting pitcher or other container.
Set the container with the beeswax into the boiling water in the saucepan to create a double boiler effect. Turn the heat down so the water is just gently boiling or simmering.
Allow the beeswax to melt. Stir occasionally. I use a wooden skewer or a wooden spoon from the thrift store for this.
After the beeswax has melted, add the 1/2 cup of coconut oil. Stir to combine, and wait for it to melt. Then add any essential oils, if using.
Quickly pour the melted beeswax into your jars.
After pouring the wax into your containers, center the wick with a clothespin (see the video if this is unclear), or use a pencil or bamboo skewer to center the wick.
Allow the candles to sit undisturbed while the wax sets up and hardens. Then trim the wicks about 1/4" to 1/2" long.
I usually wait a day or two before burning the candles for the first time. This allows them to cure. When burning for the first time, it's a good idea to let the candle burn for a couple of hours. That's it!
Note: Different shades of beeswax will give you different shades of candles. I used white beeswax for some of the candles in this post, and the darker ones were made with yellow beeswax.
Supplies Needed for This Project
- 1 pound beeswax
- 1/2 cup coconut oil
- wax melting pitcher and saucepan for double boiler
- candle wicks
- 8 ounce jelly jars or 4 ounce canning jars (or any size you have available)
- glue gun and glue sticks
- clothespins
- essential oils, optional
Pin This Post for Later
This post contains affiliate links. Read my disclosurehere. Sharinghere.